Ottawa - (613) 731-4434 | Toronto - (416) 530-9703

  • Jan Allaerts MC2 Finish Cartridge
  • Jan Allaerts MC2 Finish Cartridge
  • Jan Allaerts MC2 Finish Cartridge
  • Jan Allaerts MC2 Finish Cartridge

Jan Allaerts MC2 Finish Cartridge

$9,999.00

QUANTITY

DETAILS

When Jan Allaerts makes a cartridge it's a special process that can take up to a year. As any MC2 Finish owner will tell you, it's worth the wait. There is no other cartridge we've heard which has the balance of impeccable technical performance and absolutely beguiling musicality. Dead quiet groove noise, extreme dynamics and the utmost of detail are matched by the pure naturalness of every note. This is a cartridge with no trade-offs. It is all things to all people. Hear the sound of the master tape.

It was back in 1978 that the company was founded by J.Allaerts. At first the company lended its services to the retailers by doing repairs on various audio and video hardware.

Over the years, the company focused more and more to the field of repair and maintenance 
of micro mechanical parts on several parts of cartridge systems.

By doing so an enormous amount of know-how could be gathered but moreover
all these special techniques could be integrated into an consistent insight.

So the company soon got renowned worldwide for its top level moving coil cartridges 
competing with the very best available.

       

Specifications:

Casing Manually milled and drilled aluminium
Cover 0.2 mm thick,coated with 24 ct. gold foil
Color Anodized in gold colored finish (scratch resistant.)
Terminals Soft iron, shaped by grinding and milling
Connectorpins 1.3 x 20 mm, 14 ct. solid gold pins
Screw bushes 2,5 mm brass treaded bushes mounded into casing
Magnet Permanent. 5 Cat : rare earth magnet)
Coil 2 mm x 2 mm  Teflon Type c 1004
Coil windings 20 micron gold handwinding wire
Stylus holder Solid boron rod : 0.3 mm x 7 mm
Stylus tip

TIP FG S HIGH TECH diamond,highly polished finish.

Shock absorption High Tech rubber, 100 SCHOR
Tension wire Steel wire spring, code 1007
Coil impedance 32        Ohm
Load impedance 845       Ohm
Load capacity 150       pF
Stylus pressure 1.8        Grams,  (Max Tolerance  0.05 Gram)
Output Voltage 200       µV
Max tracing capacity 400       µmm
Channel separation 70  dB at 100 Hz
60  dB at 1   Khz
70  dB at 20 Khz
Frequency range 3 Hz  to 100 Khz
Total  THD % 0.1 %
Total  unit  weight 10 Grams  (incl. socket screws)
Jan Allaerts MC2 Finish Cartridge

When Jan Allaerts makes a cartridge it's a special process that can take up to a year. As any MC2 Finish owner will tell you, it's worth the wait. There is no other cartridge we've heard which has the balance of impeccable technical performance and absolutely beguiling musicality. Dead quiet groove noise, extreme dynamics and the utmost of detail are matched by the pure naturalness of every note. This is a cartridge with no trade-offs. It is all things to all people. Hear the sound of the master tape.

It was back in 1978 that the company was founded by J.Allaerts. At first the company lended its services to the retailers by doing repairs on various audio and video hardware.

Over the years, the company focused more and more to the field of repair and maintenance 
of micro mechanical parts on several parts of cartridge systems.

By doing so an enormous amount of know-how could be gathered but moreover
all these special techniques could be integrated into an consistent insight.

So the company soon got renowned worldwide for its top level moving coil cartridges 
competing with the very best available.

       

Specifications:

Casing Manually milled and drilled aluminium
Cover 0.2 mm thick,coated with 24 ct. gold foil
Color Anodized in gold colored finish (scratch resistant.)
Terminals Soft iron, shaped by grinding and milling
Connectorpins 1.3 x 20 mm, 14 ct. solid gold pins
Screw bushes 2,5 mm brass treaded bushes mounded into casing
Magnet Permanent. 5 Cat : rare earth magnet)
Coil 2 mm x 2 mm  Teflon Type c 1004
Coil windings 20 micron gold handwinding wire
Stylus holder Solid boron rod : 0.3 mm x 7 mm
Stylus tip

TIP FG S HIGH TECH diamond,highly polished finish.

Shock absorption High Tech rubber, 100 SCHOR
Tension wire Steel wire spring, code 1007
Coil impedance 32        Ohm
Load impedance 845       Ohm
Load capacity 150       pF
Stylus pressure 1.8        Grams,  (Max Tolerance  0.05 Gram)
Output Voltage 200       µV
Max tracing capacity 400       µmm
Channel separation 70  dB at 100 Hz
60  dB at 1   Khz
70  dB at 20 Khz
Frequency range 3 Hz  to 100 Khz
Total  THD % 0.1 %
Total  unit  weight 10 Grams  (incl. socket screws)
$9,999.00 In Stock

Join our mailing list for new products, weekly record orders, special offers and secret sales.

SEARCH THIS STORE