FREE SHIPPING OVER $99 | VISIT OUR 3 LOCATIONS

  • Graham Slee Elevator EXP MC Step-up
  • Graham Slee Elevator EXP MC Step-up
  • Graham Slee Elevator EXP MC Step-up

Graham Slee Elevator EXP MC Step-up

$1,099.00

QUANTITY

DETAILS

The Elevator EXP is a separate unit flat response 22,5dB gain stage (having its own outboard power supply) optimised for MC cartridges, that will boost the signal to Moving Magnet level. Its distortion is near non-existent at less than 0.01% (including the test oscillator's 0.003% distortion). Rather than being designed for the convenience of the manufacturer, the Elevator EXP sports its cartridge loading switches on the front panel - for your convenience. Furthermore, we've included all the resistive loads you've been asking for. The Elevator EXP is supplied complete with a PSU1-24 power supply for the best possible performance.

        

  • Moving coil step-up preamplifier to drive your MM phono stage
  • Electronic equivalent of a step-up transformer (SUT)
  • Seven different preset cartridge load impedances at your fingertips
  • Tube like extended open-loop frequency response from our Ultra-Linear "toolbox"
  • Inherent reduced vinyl click and pop characteristic
  • Rock steady sound stage and "3D" performance
  • Solid-state reliability

      

Specifications:

Input range 0.15mV to 0.8mV
Output (for input range) 2mV to 10mV, suitable for a moving magnet phono stage input
Maximum input 378mV rms (a very large overload margin)
Maximum output 4.914V rms
Gain 22dB (13) < 10Hz to 917kHz (-3dB points)
Input impedance 23, 30, 100, 840, 1000, 5100 and 47000 Ohms
Output (driving/source) impedance 300 Ohm
Recommended load impedance 47k Ohms phono stage preamp input
Noise at output -99dB CCIR Q-pk
Distortion 0.02%
Frequency response < 10Hz to 917kHz (-3dB points)
Channel balance 0.2dB
Channel separation 64dB
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
Graham Slee Elevator EXP MC Step-up

The Elevator EXP is a separate unit flat response 22,5dB gain stage (having its own outboard power supply) optimised for MC cartridges, that will boost the signal to Moving Magnet level. Its distortion is near non-existent at less than 0.01% (including the test oscillator's 0.003% distortion). Rather than being designed for the convenience of the manufacturer, the Elevator EXP sports its cartridge loading switches on the front panel - for your convenience. Furthermore, we've included all the resistive loads you've been asking for. The Elevator EXP is supplied complete with a PSU1-24 power supply for the best possible performance.

        

  • Moving coil step-up preamplifier to drive your MM phono stage
  • Electronic equivalent of a step-up transformer (SUT)
  • Seven different preset cartridge load impedances at your fingertips
  • Tube like extended open-loop frequency response from our Ultra-Linear "toolbox"
  • Inherent reduced vinyl click and pop characteristic
  • Rock steady sound stage and "3D" performance
  • Solid-state reliability

      

Specifications:

Input range 0.15mV to 0.8mV
Output (for input range) 2mV to 10mV, suitable for a moving magnet phono stage input
Maximum input 378mV rms (a very large overload margin)
Maximum output 4.914V rms
Gain 22dB (13) < 10Hz to 917kHz (-3dB points)
Input impedance 23, 30, 100, 840, 1000, 5100 and 47000 Ohms
Output (driving/source) impedance 300 Ohm
Recommended load impedance 47k Ohms phono stage preamp input
Noise at output -99dB CCIR Q-pk
Distortion 0.02%
Frequency response < 10Hz to 917kHz (-3dB points)
Channel balance 0.2dB
Channel separation 64dB
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
$1,099.00 In Stock

Join our mailing list for new products, weekly record orders, special offers and secret sales.

SEARCH THIS STORE